top of page

2U SUB & UPPER BASS PREAMP

MA2USP_HFSD_FRONT_CLEAR.png

SUB SECTION

INPUT

Controls the gain of the whole preamp giving enough headroom for the rest of the stages in the preamp.

4 BAND EQ

4 bands of specially selected frequencies to hit the sweet spots in any enclosure.

When fully anti-clockwise each frequency is FLAT & gain is added as you turn them up.

PARAMETRIC EQ

Sweepable peaking EQ with switchable bandwidth. When button is out the Q is narrow & when pushed in the Q is wider.

Just like the previous EQ stage, when the gain is fully anti-clockwise, the frequency is not boosted.

LF CONTOUR

A specially designed filter has now been implemented into the Bass Preamp allowing you to tailor your sub enclosure with frequency & damping controls to the sound you desire.

FILTER/CROSSOVER

The crossover section of the Bass Preamp has both variable high and low pass sections.

The high pass button allows to select one of the two 24dB/Oct Butterworth filters switchable between 35Hz when the button is out and 27Hz when pushed in

The low pass control is a fully variable 24dB/Oct filter allowing you to sweep between 40Hz - 100Hz with an additional Q control allowing you to shape the low pass to virtually any filter available.

PHASE BUTTON

This push-button allows a reverse phase of 180 degrees when pushed in

OUTPUT

Controls the sub bass signal coming out the preamp

KILL SWITCH

Mutes the output of the signal when in the up position

UPPER BASS SECTION

INPUT

Controls the gain of the whole preamp giving enough headroom for the rest of the stages in the preamp.

LINK BUTTON

When out, the inputs on the back are separate. When pushed in, the Sub input is the main input for both sections, the Upper Bass input is disabled.

6 BAND EQ

6 bands of specially selected frequencies to hit the sweet spots in any enclosure.

When fully anti-clockwise each frequency is FLAT & gain is added as you turn them up.

PARAMETRIC EQ

Sweepable peaking EQ with switchable bandwidth. When button is out the Q is narrow & when pushed in the Q is wider.

Just like the previous EQ stage, when the gain is fully anti-clockwise, the frequency is not boosted.

FILTER/CROSSOVER

The crossover section of the upper bass section has both variable high and low pass sections.

The high pass control is a fully variable 24dB/Oct filter allowing you to sweep between 60Hz - 90Hz.

The low pass control is a fully variable 24dB/Oct filter allowing you to sweep between 120Hz - 200Hz.

The Q control allows you to shape the low pass to virtually any filter available.

PHASE BUTTON

This push-button allows a reverse phase of 180 degrees when pushed in

OUTPUT

Controls the upper bass signal coming out the preamp

KILL SWITCH

Mutes the output of the signal when in the up position

bottom of page